
Page 3/2
8644
WAGO I/O System 750
Multi–way solenoid valve Types 6524 and 6525
The solenoid valve Types 6524 and 6525 consist of
a pneumatic valve body tted with Type 6104 rocker
pilot valve. The rocker principle allows switching of
high pressures together with low power consumption
and fast response times.
All valves are equipped with manual override as a
standard.
4 0.6 Vac. –00 5 20 24 V DC 53 958 B
4.5 – 00
)
5 20 24 V DC 50 333 H
36 – 00 2
20 24 V DC 44 933 R
36 – 45 5
28 24 V DC 48 227 H
3/2–way valve, servo–assisted in
de-energized position port 2 to atmosphere
4 0.6 4.5 – 00
)
2 20 24 V DC 50 334 A
36 – 00 2
20 24 V DC 44 934 J
36 – 45 5
28 24 V DC 52 39 V
3/2–way valve, servo–assisted in
de-energized position port 2 pressurized
4 0.6 4.5 – 00
))
5 20 24 V DC 50 335 B
36 – 00 5
20 24 V DC 44 935 K
36 – 45
20 28 24 V DC 50 60 K
5/2–way valve, servo–assisted in
de-energized position port connected
to port 2, port 4 exhausted
PA (polyamide)
NBR, FKM, PUR
Lubricated and non-lubricated dry air, neutral gases
(5 µm-lter recommended)
Manifold for MP
push-in connection Ø /4”, 5/32”, 6 mm, Type MP
with M5, M7
As a standard feature
24 V DC
W
Continuous operation (00% ED)
Rectangular plug with raster 5.08 mm
With 2 screws M2x20
As required, preferably with actuator upright
Measured at 68°F (+20°C), 87 PSI pressure at valve
inlet and 4.5 PSI pressure difference
Measured as overpressure to the atmospheric pressure
Measured according to ISO 2238
)
version with auxiliary air
Comentários a estes Manuais